C-COM Satellite iNetVu Guida alla Risoluzione dei Problemi Scaricare il pdf (Pagina 19)

iNetVu Troubleshooting Guide

C-COM Satellite Systems Inc.

Page 19 of 88

Step 3:

• The new controller must be calibrated with the existing mobile platform.

• Proceed into the Maintenance screen and select the tab of the axis you wish to calibrate on the

upper right. The only calibrations we need to perform are for the Azimuth (AZ) axis and

Polarization (PL) axis. There is no importance of which is performed first, as long as both are done

consecutively.

• No Polarization (PL) calibration is required if the platform is equipped with a tilt sensor: (Platform

ver. 3.x (980/1200) and 2.x (1800) the calibrate PL will be “grayed out”.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 87 88

Nessun commento

C-COM Satellite iNetVu Guida alla Risoluzione dei Problemi Pagina 19